MACHTEK L63 ALLIGATOR hydraulic shears for scrap
€ 7,342.00 p/pcs.
The ALLIGATOR L63 scrap shears are designed for materials up to 35mm thick. Technical data Scissors for scrap ALLIGATOR L63 Power: 630 kN scissor arm 120 kN holding arm Cylinder diameter: 125 mm shear arm 80 mm holding arm Diameter of piston: Scissor arm 80 mm. Holding arm 45 mm Control system: Electrohydraulic changeover valve, control panel Nominal pressure: 20 MPa Engine power: 7.5 kW Maximum pump delivery capacity: 25 cm3 Lifting frequency: 8-10 times per minute Blade length: 600 mm The maximum blade width: 250 mm The maximum size of the material to be cut: Angle 40x40x4 mm (3 pieces) I-beam 100x68x4.5 mm Channel 120x53x5,5 mm Plate 20x200 mm Square rod 30x30 mm Round rod Ø 35 mm dimensions: Machine 1700x800x1400 mm Oil tank 1000x700x1100 mm The service is easy and safe - the ALLIGATOR shears can be operated by a single employee, only after basic training, directly at the workplace. Advantages of ALLIGATOR L63 scissors for scrap Hydraulic scrap shears series ALLIGATOR allow you to adjust the opening height of the shears. When we cut large quantities, we can lower both arms, reducing the time between successive cuts, which will allow for quick and efficient work. The arms can be raised when cutting larger sizes. The shears are also equipped with an automatic speed switch that adapts the strength and speed of the shears to the thickness and resistance of the cut material, thus saving electricity. Hydraulic scrap shears series ALLIGATOR is controlled by a convenient control panel - you can start work at any time and stop work. We offer more Scrap Shears to Alligator with a blade length from 600 to 1800 mm with power from 7.5 to 37 kW You can find them on our website: www.machtek.pl We provide professional advice before buying, service, technical support and spare parts during operation. MACHTEK sp. z o.o. - Recycling machines
make a deal
kg to deliberate
€ 7,342.00 p/pcs.